Wednesday, 10 July 2013

With Fence Repair Denver CO Homeowners Keep Yards Safe

By Carmella Watts


There are many reasons homeowners put fences around their property. They help to make sure that the kids and pets stay safe and out of street. They also provide a visual screen for privacy. However, all fences can suffer the negative effects of the weather. With wood, rot is normally the greatest enemy. With fence repair Denver CO residents make sure their fences continue to function as planned.

There are products that can reduce the chances of rot. Pressure treated lumber is saturated with preservatives and can resist rot even when in constant contact with the ground, as with posts. Redwood and cedar also do well when buried. However, homeowners should know that these materials are expensive. For above the ground sections, homeowners may get by with painting or staining fences to preserve them. However, paints and stains do little good under the ground's surface.

Most of the time, wood fences are constructed using vertical posts and horizontal rails. The rails are attached to the posts and provide support for pickets or boards used for screening. These three components should be easy for almost anyone to recognize. While screening is easier to replace, the posts are usually the first to need replacement.

While rot is usually seen in posts initially it can also affect the screening and bottom rails. If the posts were set in concrete or properly treated, they may outlast rails and screening materials. Homeowners can protect fences by keeping vegetation trimmed from the wood so it can dry easily. Automatic sprinklers should be adjusted so they do not wet the materials one is trying to protect.

When problems are discovered, they should be corrected before the damage starts to spread. For example, if a post breaks and no longer supports the rails a strong wind may bring down the entire section. It is much less expensive to make repairs of a single post instead of replacing the rails and screening materials damaged due to the fall.

Gates provide access into the fenced area. However, gates must be able to move while still providing the security needed for other sections of fences. They are sometimes the first part of fences to fail. Sagging gates are often caused by problems with hinges. The hinges should be inspected and replaced if needed.

Some sagging gates only require minor work to operate correctly again. Sometimes one needs to add a thin shim into the hinge mortise in order to ensure the gate operates as it should again. If the gate is sagging from its own weight, adding a couple of screw eyes, a turnbuckle and wire can help by providing proper tension to support the gate, allowing it to operate correctly again.

Using fence repair Denver CO residents can ensure they get the longest life out of existing fences. However, there comes a time when it is better to replace fences instead of making repairs. Today there are many options available in fencing. Some may offer a more permanent solution than replacing with wood.




About the Author:



No comments:

Post a Comment